Usually people like to put the laptop on the bed to play, over time it feels particularly easy to heat up the laptop, while the noise is also very large, even switch or open the program will be card, a serious will be blue screen or automatic restart. The following will tell you the solution to the high temperature of the laptop.
1. Start with the most basic and most important fan cooling it. Be sure to ensure that the fan is not dusty, if there is dust, you can turn on the computer with a brush a few times, the dust will blow off with the wind
2. If the fan is too dusty, it is recommended to use a special compressed air spray in the off state or remove the panel to clean the fan
3. Another important issue, if you put the computer to bed with, remember to put a book under the fan to ensure that the fan mouth is not blocked by your pants
4. generally when the noise is very large should be a lot of computer programs running, or the program is not running smoothly, etc., resulting in the fan is also adjusted to run to generate high temperatures and noise, you should clean up the memory or close some programs and windows
5. Of course, it is best to restart the computer, memory and program clean up more clean, release the program and memory after the CPU fan may come down
6. You can also connect a USB cooling base, but note that the more cooling base fans, the better the cooling effect, the more noise
7. Want a better effect, you can connect an external air-extracting radiator. Just be aware that this cooler does not receive the fan outlet, received on the PCMCIA interface better, otherwise it is blocking the original fan out of the wind
8. If your computer's fan problem noise, you feel that the cooling effect is not good, you can try to replace the fan
9. Now the laptop power management software, you should at least use the "balanced mode" to run, otherwise low performance running large programs are also prone to high temperatures
10. Of course, the best way or the previous steps, be sure to note that the air conditioning is on to ensure that the indoor temperature is not too high effect better
